주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

4 단계
With a plastic opening tool, carefully push the dock connector out of its outer case recess. Work each corner evenly until the connector comes free. Since the dock connector is attached to the logic board, pushing it out of the case may cause the logic board to begin to flex. Take extra care not to permanently warp the board.
  • With a plastic opening tool, carefully push the dock connector out of its outer case recess. Work each corner evenly until the connector comes free.

  • Since the dock connector is attached to the logic board, pushing it out of the case may cause the logic board to begin to flex. Take extra care not to permanently warp the board.

Drücke vorsichtig mit einem Plastiköffnungswerkzeug den Dockanschluss aus seiner Vertiefung im äußeren Gehäuses. Drücke gleichmäßig jede Ecke heraus, bis der Anschluss frei wird.

Der Dockanschluss ist am Logic Board angebracht, deswegen kann sich das Logic Board beim Ausdrücken des Anschlusses aus dem Gehäuse verbiegen. Sei sehr vorsichtig, dass sich das Board nicht dauerhaft verzieht.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.