주요 콘텐츠로 건너뛰기

Microsoft Surface Pro 5 Motherboard Replacement

3 단계
Microsoft Surface Pro 5 Motherboard Replacement, Disconnect the digitizer cable: 0 단계, 이미지 3개 중 1개 Microsoft Surface Pro 5 Motherboard Replacement, Disconnect the digitizer cable: 0 단계, 이미지 3개 중 2개 Microsoft Surface Pro 5 Motherboard Replacement, Disconnect the digitizer cable: 0 단계, 이미지 3개 중 3개
Disconnect the digitizer cable
  • Insert one point of a pair of pointed tweezers into a gap in the edge of the EMI shield covering the digitizer connector.

  • Use the tweezers to pry the EMI shield away from the display as much as you can without bending it.

  • Repeat this procedure at different points around the shield until it is free. Remove the shield.

  • Try not to deform the shield too much—you will need to reinstall it during reassembly.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.