LG G6 Rear Glass Panel Removal

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 8 안내서에 영향을 미칩니다.

안내서로 돌아가기

영어

한국어

이전 단계 다음 단계

4 단계 번역중

4 단계

LG G6 Rear Glass Panel Removal: 0 단계, 이미지 3개 중 1개

LG G6 Rear Glass Panel Removal: 0 단계, 이미지 3개 중 2개

LG G6 Rear Glass Panel Removal: 0 단계, 이미지 3개 중 3개

To make this step easier, you can prop up the heated edge of the phone on something that is about 0.5 inches (13 mm) thick, like an eraser. This will angle the phone so that the opening tool is easier to insert.
If you don't have a small object for propping, you can (carefully) perform this step at the edge of a desk or table to achieve the same angle of entry.
Lift the rear panel's bottom edge with your suction cup, opening a slight gap between the panel and the frame.
This may require a significant amount of force. If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.
Once you've created a gap, press the flat end of an opening tool into the gap.
The rear glass panel is fragile and can break if you use too much force or attempt to pry with metal tools.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.