주요 콘텐츠로 건너뛰기
7 단계
Undo 8 screws on the retaining plate then remove the plate taking care to not break the small connector on the plate that connects just under the taptic engine Remove the loud speaker and the taptic engine. Remove the loud speaker and the taptic engine.
Remove Loudspeaker and Taptic engine
  • Undo 8 screws on the retaining plate then remove the plate taking care to not break the small connector on the plate that connects just under the taptic engine

  • Remove the loud speaker and the taptic engine.

Drehe acht Schrauben an der Halteplatte heraus. Entferne dann die Platte. Achte dabei auf den kleinen Stecker auf der Platte, der direkt unter der Taptic Engine angeschlossen ist.

Entferne Lautsprecher und Taptic Engine.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.