주요 콘텐츠로 건너뛰기
영어
스페인어
7 단계
Undo 8 screws on the retaining plate then remove the plate taking care to not break the small connector on the plate that connects just under the taptic engine Remove the loud speaker and the taptic engine. Remove the loud speaker and the taptic engine.
Remove Loudspeaker and Taptic engine
  • Undo 8 screws on the retaining plate then remove the plate taking care to not break the small connector on the plate that connects just under the taptic engine

  • Remove the loud speaker and the taptic engine.

Quitar los 8 tornillos de la placa de retención y luego retire la placa teniendo cuidado de no romper el conector pequeño , que se conecta justo debajo de el motor de vibración háptico. (Taptic Engine)

Retire el altavoz y el motor de vibración háptico. (Taptic Engine)

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.