주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 22개에 영향을 미칩니다.

영어
프랑스어

5 단계 번역 중

5 단계
With the display panel still lifted, disconnect the four inverter cables. During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.
  • With the display panel still lifted, disconnect the four inverter cables.

  • During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.

  • During reassembly, the order of the inverter cables is interchangeable within each socket.

  • If you are replacing a hard drive and have an extra set of hands, it is possible to reach in and remove the drive without disconnecting anything but the LCD temp and display connector in the previous step with the LCD in its propped position.

Pendant que l'écran est levé, débranchez les quatre câbles inverter.

Pendant la réinstallation, placez les quatre connecteurs des câbles inverter dans des espaces vides entre les composants attachés au panneau arrière afin que l'écran repose bien à plat.

Lors du remontage, l'ordre des câbles inverter est interchangeable dans chaque prise.

Si vous changez de disque dur et avez une paire de mains libres à disposition, il est possible de retirer le disque dur en débranchant seulement le connecteur de l'écran et celui de la température LCD à l'étape précédente.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.