주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 22개에 영향을 미칩니다.

5 단계 번역 중

5 단계
With the display panel still lifted, disconnect the four inverter cables. During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.
  • With the display panel still lifted, disconnect the four inverter cables.

  • During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush.

  • During reassembly, the order of the inverter cables is interchangeable within each socket.

  • If you are replacing a hard drive and have an extra set of hands, it is possible to reach in and remove the drive without disconnecting anything but the LCD temp and display connector in the previous step with the LCD in its propped position.

当提起显示面板的时候,断开四条变频器电缆。

在重新安装时,将四个变频器电缆连接器放置在连接到后面板的组件之间的空隙中,以使显示面板齐平。

在重新组装时,变频器电缆的顺序可在每个插座内互换。

如果要更换硬盘,需要额外的帮手,来以进入内部并取出硬盘,而不必断开上一步中的LCD温度和显示连接器,只需将LCD支撑起来。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.