주요 콘텐츠로 건너뛰기

Einstellen des Hinterrad-Umwerfers einer Kettenschaltung

1 단계 번역중

1 단계
Adjusting the Rear Derailleur: 0 단계, 이미지 2개 중 1개 Adjusting the Rear Derailleur: 0 단계, 이미지 2개 중 2개
  • Bolt the derailleur to the mounting tab with an Allen wrench.

  • Be careful not to over-tighten the steel bolt, as this can strip the aluminum mounting tab.

Befestige den Umwerfer mit einem Inbusschlüssel am Rahmen.

Achte darauf die Stahlschrauben nicht zu fest anzuziehen, dies könnte die Aluminiumbefestigung beschädigen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.