주요 콘텐츠로 건너뛰기

Adjusting the Rear Derailleur

6 단계 번역중

6 단계
Adjusting the Rear Derailleur: 0 단계, 이미지 1개 중 1개
  • Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening this screw causes the derailleur to move slightly towards a larger sprocket, while tightening it moves the derailler towards a smaller sprocket.

  • Shift through each gear while pedaling. The derailleur should move the chain one gear over each time you shift up or down.

  • If the chain skips or makes noise when you are not shifting, use the barrel adjustment screw to fine tune the derailleur alignment.

  • Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.