Nexus 7 (2nd Gen Wi-Fi) LCD Board

  • Nexus 7 (2nd Gen Wi-Fi) LCD Board / With Cable
  • Nexus 7 (2nd Gen Wi-Fi) LCD Board / Without Cable
  • Nexus 7 (2nd Gen Wi-Fi) LCD Board / Without Cable
Nexus 7 (2nd Gen Wi-Fi) LCD Board

US$19.99

US$19.99

제품 재입고 메시지를 보내드리겠습니다.

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

제품 정보

설명

설명

Replace a corroded, damaged, or malfunctioning LCD daughter board containing the micro USB socket. This part is compatible with a model ME571K Nexus 7.

This is a used OEM part.

호환성

호환성

  • Google Nexus 7 (Wi-Fi 2nd Gen)

명세서

명세서

Model #:
K008 (ME571K)

호환성

Nexus 7 2nd Generation
Wi-Fi (ME571K/K008)

수리 경험담

사용자 아바타

내 문제

So my 10 year old who gets to play on his tablet on the weekend said that his tablet didn't charge at all the entire week. Sure enough it had been plugged in but no power.

나의 수리

Watched some videos, did some web research and came here to buy the part. Replacement was totally straightforward. Took me 15 min . . .

사용자 아바타

내 문제

Initially the device had some sporadic problems but the worst was trouble charging with the USB charger.

나의 수리

After removing and installing my first board, the unit started but the screen did not respond to touch. I took it apart and put back together several times and finally gave up figuring I may hav . . .

사용자 아바타

내 문제

I resorted to using wireless charging for a while but not being able to transfer data quickly from a computer was super annoying.

나의 수리

The repair was surprisingly easy ! Most difficult part of the process is opening up the tablet. Once you get that done its basically clear sailing from there.

내 조언

Don't be afra . . .

사용자 아바타

내 문제

I had a problem whenever I wanted to charge my Nexus 7 (2013) It just wouldn't charge. It would only charge; sometimes, when you agitate the micro usb end of the charging cable. But after a while, the charging stops again and I would have to agitate the cable's charging end again to get the tablet . . .

사용자 아바타

내 문제

I tried to bend the USB to a 90° because the OTG plug didn't fit. The USB snapped off the board.

나의 수리

New board install went smooth

내 조언

Modifying your car is easier than modifying a PCB. Get creative.

사용자 아바타

내 문제

My son Korwin's Nexus 7 FHD (2013) had a broken usb charging port. Additionally, while explaining to me what the problem was he dropped the tablet into my coffee.

나의 수리

The repair went smoothly & the repaired tablet has been used daily for over a week now with no problems cropping up.

내 조언

Remember when repairi . . .

사용자 아바타

내 문제

Some time ago, I dropped my Nexus while the Micro USB charging cord was still plugged in and, of course, it fell right on the plug. The Micro USB port on the Nexus was never the same (specifically the charging cord didn't fit in tightly any more) and the device got more and more finicky about the p . . .

사용자 아바타

내 문제

My Nexus would no longer charge or sync with my PC

나의 수리

Simple, just carefully remove the back from the Nexus, remove 6 screws holding the Usb board and unclip and remove all the cables attached replace the board and reverse the process. Took 5 Min. and now its perfect again.

내 조언

The hardest part is removing . . .

사용자 아바타

내 문제

The USB Data/Charging port stopped working on my sons Nexus 7

나의 수리

The repair went extremely smooth. I used the teardown guide on iFixit as a reference.

내 조언

Use the plastic opening tools to speed things, keep from scratching up your device, and to save your fingers!

사용자 아바타

내 문제

Dropped my nexus 7 with the micro usb plugged in and messed up the charging port. Tablet would only charge if micro usb was held in a weird position.

나의 수리

Reapir couldn't have been easier. Took less than 5 mins to fix.

내 조언

Make sure you put all the screws in the correct place some are a little longer.

더 보기