내 문제
charging port was missed up...
나의 수리
..
내 조언
..
해당 국가에서는 본 제품을 판매하지 않습니다.
품목 코드: IF297-018-1
제품 정보
설명
설명
Replace a damaged microUSB port on your 2nd generation PS4 DualShock 4 controller.
This charging assembly is only compatible with the second generation DualShock 4 controller, indicated by the part number JDS-011. The best way to determine which version you have is to disassemble your controller and look for the part number.
Find the 1st generation JDS-001 part here.
This is a used OEM part.
수리 경험담
charging port was missed up...
..
..
- 2015년 10월 08일
My ex roommate broke both ps4 controller charging ports from trying to shove the wrong charger into the port... because obviously if it doesn't fit one it may fit the other -_-
It went well... eventually. I had some issues with the stupid trigger buttons and those pesky little springs but I looked up a separate video for that.
I learned that it's important to push the cord from charging port to motherboard aside when closing the controller up because if you don't you may accidentally squeeze it with the screw when you close up which will prevent it from working. So what I did was I just pushed it over the battery and then closed up so it was fine. Also remember for the trigger buttons to make sure the gel part is snapped back into place or your trigger button won't work! It was much easier to do the fix then I thought it was going to be!!
My ex roommate broke both ps4 controller charging ports from trying to shove the wrong charger into the port... because obviously if it doesn't fit one it may fit the other -_-
It went well... eventually. I had some issues with the stupid trigger buttons and those pesky little springs but I looked up . . .
Because it needed to be repaired
Quick and easy
The cheaper way is the better way in my book
추천 상품