MacBook Unibody (A1342) Lower Case

  • MacBook Unibody (A1342) Lower Case
MacBook Unibody (A1342) Lower Case

US$149.99

US$149.99

제품 재입고 메시지를 보내드리겠습니다.

안드로이드 수리 키트

A new screen or battery is one kit away.

지금 장보기

안드로이드 수리 키트

A new screen or battery is one kit away.

지금 장보기

제품 정보

설명

설명

Replace a dented or scratched lower case compatible with a Model A1342 MacBook Unibody laptop.

호환성

호환성

  • MacBook 13" Unibody A1342 Late 2009 to Mid 2010

명세서

명세서

Part #:
922-9183, 661-5974
Model #:
A1342

호환성

MacBook Unibody A1342
2.26 GHz
2.4 GHz

수리 경험담

사용자 아바타
gveldman's Story Photo #462277

내 문제

A few weeks ago the rubber coating released it self, caused by the heat, from the lowercase of our Macbook, end 2009 version. Because the Apple replacement program was not applied on this Macbook, I decided to repair it my self. The Macbook is in perfect state, including 4GB memory and running Yosem . . .

사용자 아바타

내 문제

Rubberized on original back was coming off. Rubber stretched and buckled over time

나의 수리

Easy, eight screws and done. Finding the correct back from other vendors was the greatest headache

내 조언

call Fixit first.

사용자 아바타

내 문제

My partners late 2009 Macbook started to fall apart all at once. The rubberised bottom peeled off, the batter stopped holding a charge and the fan failed.

I replaced the laptop with a new macbook and kept the old one until it failed completely which was the day after it was replaced.

A year later . . .

사용자 아바타

내 문제

Bottom was missing screws, and rubber was coming off the metal. Was not affecting operation of the laptop. More cosmetic than anything.

나의 수리

Got the new bottom and screws in the mail a few days after I ordered them, removed the old bottom, and installed the new bottom within minutes. Very easy to do.

내 조언

N . . .

사용자 아바타

내 문제

Heavy-duty processing warms up the underside of my MacBook, and eventually the rubber layer on the base-plate released itself from the metal where the heat is most intense and created a large bubble. The computer couldn't sit flat on a tabletop anymore, so a replacement base-plate was required.

나의 수리

The n . . .

사용자 아바타

내 문제

My wife's Macbook stopped charging. After a short troubleshooting I figured out that the Magsafe connector was at fault. Also, as the laptop was mostly used on soft covered surfaces, cooling was poor, causing some overheating of the lower case, hence causing bubbling of the non slippery rubberized s . . .

사용자 아바타

내 문제

Because it was broken.

나의 수리

10 min. Done.

내 조언

It's great. Never grab your chick and through it to the bed when the laptop is sitting there. The display screen may suffer.

사용자 아바타

내 문제

The old case was coming apart and needed to be replaced.

나의 수리

Very easy, just remove old case and replace with the new one.

내 조언

Having the right screwdriver made the job easier. Would recommend that first.

더 보기