Apple Watch Series 6 Microsoldering
Replacement parts for your Apple Watch Series 6 to fix your broken smartwatch!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Choose your model of Apple Watch Series 6:
Parts that work with Apple Watch Series 6:
Apple Watch (44 mm Series 6) Display Flex Cable
Replace the flex cable that connects the display to the logic board compatible with Apple Watch (44 mm Series 6) model A2292, A2294, A2376 smartwatches.
Apple Watch (40 mm Series 6) Display Flex Cable
Replace a damaged or torn flex cable that connects the display to the logic board compatible with the 40 mm Series 6 Apple Watch. Installation requires microsoldering.
LTE versions of Apple Watch Series 6 can be identified by the distinctive red circle on the digital crown (in place of the red dot from the Series 3). The Series 6 watch comes in 40 mm and 44 mm configurations in a variety of colors and materials. Internally, the Series 6 has a faster architecture, and add an "always-on" altimeter and a Blood Oxygen sensor (SpO2). Tools and repair procedures remain similar to Apple Watch Series 5.
- Apple Watch (aluminum case with Sport Band or Sport Loop, or stainless steel case with Sport Band or Milanese Loop)
- Apple Watch Nike+ (aluminum case with Nike Sport Band or Nike Sport Loop)
- Apple Watch Hermès (stainless steel case with Hermès leather band)
- Apple Watch Edition (titanium and ceramic case)