iPhone 5s/SE LCD and Digitizer - Original LCD

  • iPhone 5s/SE LCD and Digitizer - Original LCD / Black
  • iPhone 5s/SE LCD and Digitizer - Original LCD / Black
  • iPhone 5s/SE LCD and Digitizer - Original LCD / White
  • iPhone 5s/SE LCD and Digitizer - Original LCD / White
  • 360°
360
iPhone 5s/SE LCD and Digitizer - Original LCD

비매품

비매품

제품 정보

설명

설명

Replace a cracked glass screen or malfunctioning display on your iPhone 5s or iPhone SE.

부품 조립체가 포함하는

부품 조립체가 포함하는

  • Front Panel Glass Digitizer Screen
  • LCD
  • Speaker Mesh
  • Proximity Sensor Bracket
  • Front Camera Lens Bracket

호환성

호환성

  • iPhone 5s and iPhone SE

호환성

iPhone 5s
16 GB
32 GB
64 GB
iPhone SE
A1662 US AT&T/T-Mobile/Verizon
A1723 US Sprint and Global
A1724 Mainland China

수리 경험담

사용자 아바타

내 문제

My screen was badly cracked.

나의 수리

It was much harder than I thought it would be, but the photos and directions were clear and helpful.

내 조언

I would've completely forgot about moving the camera to the new screen if my boyfriend hadn't noticed that I needed to. The guide I was using didn't say anything about mov . . .

사용자 아바타

내 문제

Shattered Screen

나의 수리

It was not difficult but a bit harder than I expected since I have to take off and reuse the original parts (Touch ID sensor, Front facing camera, ...). Have access to a heat gun in the lab helps. Overall it is pretty fun to do this myself.

내 조언

One, make sure to follow the guide and no . . .

사용자 아바타

내 문제

After owning several iPhones the se was the first one I broke. A six foot fall to the concrete was too much.

나의 수리

With this being my first broken phone it was also my first repair. After reading all the instructions the repair went smooth.

내 조언

The screen appeared to be good quality, but after 1 day a weird bre . . .

사용자 아바타

내 문제

Cracked screen

나의 수리

Very well

내 조언

Not for the average technician... I have 30+ years electronic repair.

사용자 아바타

내 문제

Watched the video & thought it would be easy.

나의 수리

No Problem.

내 조언

Wasn't very clear on the backing plate, but after reading the instructions I realized I didn't have to remove the adhesive ground from one of the connectors.

사용자 아바타

내 문제

The touchscreen wasn't responding well. I bought a new display assembly to replace the old one.

나의 수리

Turned out the problem is probably with the digitizer connector on the logic board. There are a couple of little metal connections that seem to have broken, and the touch screen is consequently unresponsiv . . .

더 보기