iPod Classic 160 GB Headphone Jacks
Replacement parts for your iPod Classic 160 GB model to fix your broken iPod!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
iPod Classic 160 GB 모델을 선택하십시오:
iPod Classic (Thin) Headphone Jack & Hold Switch
Replace a damaged or dirty headphone jack and hold switch for a 80, 120, or 160 GB Thin iPod Classic.
iPod Classic (Thick) Headphone Jack & Hold Switch
Replace a broken or damaged headphone jack and hold switch for your Thick iPod Classic with this part. This product is compatible with Thick 160 GB iPod Classics and can ...
The "thick" version of 160 GB iPod Classic is the original larger-capacity Classic. Apple has since simplified the Classic line to offer only the "thin" version. In September 2009, a new thin 160 GB was introduced. If you are unsure which version you have (as some parts are not interchangeable between models), perform the following steps:
1) Locate the serial etched on the rear panel of the iPod
2) Go to Apple's Online Service Assistant and enter your serial number and country
3) Look at the text under the picture on the left. If it reads "iPod Classic," you have the thick version. If it reads "iPod Classic (Late 2009)," you have the thin version.
The iPod Classic is quite enigmatic to diagnose when problems occur. Use our iPod Classic troubleshooting guide to figure out what's wrong.
Select a category below or browse all compatible parts to find what you need to fix your iPod!