iPod nano (6th Gen) Display Assembly

  • iPod nano (6th Gen) Display Assembly
iPod nano (6th Gen) Display Assembly

US$44.99

US$44.99

제품 재입고 메시지를 보내드리겠습니다.

제품 정보

설명

설명

Replace a broken or damaged display assembly compatible with a sixth generation iPod nano.

This assembly includes the LCD and fused touch screen panel.

호환성

호환성

  • iPod nano (6th Gen) model A1366

명세서

명세서

Part #:
821-1134-A

호환성

수리 경험담

사용자 아바타

내 문제

I blew the screen out of a Ipod Nano 6 gen. I was going to throw it away then found the Ifixit repair article.

나의 수리

It couldn't have been any easier. The ifixit article walked me through replacing the screen, and in all it took about 20 minutes.

내 조언

Don't hesitate. Ifixit was a one-stop repair shop.

사용자 아바타

내 문제

Broken front panel.

나의 수리

It was very easy and did not take very long.

내 조언

Don't drop your device.

사용자 아바타

내 문제

The front panel screen was shattered and needed to be replaced

나의 수리

Overall the repair went well.

Problem Found - The front panel is held in place by a thin coating of some type of adhesive (which the heat gun loosens up). In my case, since the screen was shattered and splintered. There were small shar . . .

사용자 아바타

내 문제

The screen was completelly broken due a fall in the sidewalk of her iPod

나의 수리

I bought the plastic tools, the replacement part (touch glass) for the iPod nano 6th generation. As all the parts arrived, we opened the guide and follow all the steps, the instructions were clear and, with fotos we didn´t have . . .

사용자 아바타

내 문제

I left my nano in my watch pocket and it was washed. Not at good thing. Better ways to clean the screen....after the thorough cleaning, nano would sync up to computer but no screen display.

나의 수리

putting in a new screen did not solve the problem but it was easy to swap out the screen

내 조언

Don't forget your nan . . .

사용자 아바타

내 문제

The Ipod was prviously dropped on a hard serface causing the screen to splinter.

나의 수리

The total repair time too about 5 mins. Guides on Ifixit were very insightful and thorough. Hardest part was getting the miniture srews out of the EMI shield and getting the screen tucked in.

내 조언

Watch the screws don't run aw . . .

사용자 아바타

내 문제

The nano's screen was cracked after falling on pavement

나의 수리

The directions were great. The two connectors are extremely tiny and required some trial and error for a solid fit.

내 조언

Be gentle when aligning the two tiny connectors and make sure the final connection is good. Otherwise, the process is simple. Don' . . .

더 보기