Skip to main content
« 모든 스토리로 돌아가기

Repairing iPhone 3G with a magnetic screwdriver

Martin Rijken -

iPhone 3G

iPhone 3G Headphone Jack Replacement

iPhone 3G Headphone Jack Replacement

Difficult

내 문제

The headphonejack, the mutebutton and the on/off switch were out of order.

나의 수리

The process was quite clear (except the mute-switch) but to get those tiny screws back into place was terrible, used one hour for one screw near the muteswitch.. I found out that I needed a little magnet to let the screw hang under the philips screwdriver. I took the bike, full speed, to a hobby/model shop in my neighbourhood in Oslo and they gave me a tiny magnet, 4mm x 2mm x 1mm, I got it just before closingtime on saturday and I could finish the repair within half an hour. The magnet is small enough not to disturb and strong enough to make the screwdriver magnetic.

I could not repair the nutebutton, This part is complicated and the instruction and pictures could be better and more clear

내 조언

Together with the screwdriver you could sell such a little magnet. The screws are very easily to remove when taking apart and as easily to get back into place when the magnet sticks to the screwdriver just 1 or 2 cm above the screw. I would never have managed without.. ..or loosing my temper completely.

iPhone 3G/3GS Headphone Jack Assembly 이미지
iPhone 3G/3GS Headphone Jack Assembly

$14.99

iPhone 3G and 3GS Mute Button 이미지
iPhone 3G and 3GS Mute Button

$4.99

iPhone 3G and 3GS Power Button 이미지
iPhone 3G and 3GS Power Button

$4.99

Spudger 이미지
Spudger

$3.99

Phillips #00 Screwdriver 이미지
Phillips #00 Screwdriver

$6.99

Suction Handle 이미지
Suction Handle

$2.99

« 모든 스토리로 돌아가기

댓글 0개

댓글 쓰기