내 문제
1.The speaker had fine steel chips in it, that caused it to loose its' volume.
2. The back was badly scratched on the camera lens.
나의 수리
1. I used the 4, 4 CDMA, and the 4S pictorials. It was not necessary to remove the on / off switch.
2. The new back was exceedingly tight, to slide all the way into place.
Well! It fired up correctly the first time.
내 조언
Maybe to put an ink mark on the clip that coverts the camera, so you remember the direction it fits in.
댓글 0개