Power button replacement

내 문제

I thought the power button was dodgy (sort of), but turns out I'd soft bricked flashing a new ROM.

This part has essentially some sticky tape holding down some of the part in place. Over a few years and our hot environment, the adhesive holding the contact onto the cable failed.

나의 수리

Excellent. Very simple.

내 조언

Check that you haven't soft bricked before buying spare parts! x-D

Also check that when poking about you don't try to pull things apart without checking guides first. In hunting about, I wrecked the touch screen digitizer, so now that's the next part I need to get. (but I am able to run this table in "notebook" mode on stock ROM).