Skip to main content
« 모든 스토리로 돌아가기

Replacing battery on a 1st gen iphone 2G

run4da -

스토리 이미지
  • 이미지 #1
  • 이미지 #2
  • 이미지 #3

내 문제

Battery was not holding a charge

나의 수리

I was definitely scared about attempting this project. The first challenge (prying open the antennae cover) was very daunting. I've uploaded a pic for illustration purposes - A is where I started to pry open the case, and B is the correct location for prying open the start of the back cover. Once I got that part off, my confidence became stronger as I continued. I must say this is a difficult task, but is doable with steady hands and calm nerves.

내 조언

Buy all the suggested parts and tools, follow along with the online guide ( I used my hp tablet ). I also think that the guide needs to be more explicit. Prying of the black part n this device is the hardest, once you get it off the rest is a piece of cake.

Lead-Free Solder 이미지
Lead-Free Solder

$4.99

Desoldering Braid 이미지
Desoldering Braid

$4.99

« 모든 스토리로 돌아가기

댓글 0개

댓글 쓰기