주요 콘텐츠로 건너뛰기
« 모든 스토리로 돌아가기

Fixed my IPod 60G with video!

MBuehler -

iPod 5th Generation (Video)

iPod 5th Generation (Video) Headphone Jack & Hold Switch Replacement

iPod 5th Generation (Video) Headphone Jack & Hold Switch Replacement

20 - 40 분

Moderate

내 문제

The famous Ipod no right channel sound problem with a defective (ie worn-out) headphone socket.

나의 수리

It went surprisingly well. The slides did help, even though when I opened my Ipod, it seemed to look a bit different. Nevertheless. What didn't work was the 00 screwdriver, for the very tiny black screws. It was simply too big, did not catch. The screw is so tiny that I finally used a pointy tweezer of my girlfriend's. 3$ out of pocket, but that's okay. My Ipod is 7 years old and has been around the world about 7 times, so I could accept the fact that 2 of the screws - when screwing back in - did not catch. I left it as it is, and it seems to work. The space is crammed enough to keep the on/off switch in place. Kudos to the designers/engineers; it is amazing how the fit all that stuff into this restricted space Happy camper, me. I have thousands of rare songs on my Ipod and really would have hated to lose it.

내 조언

Try it. In all likelihood you will succeed; and you will feel proud. Much better than frustrated at losing the Ipod!

Phillips #00 Screwdriver 이미지
Phillips #00 Screwdriver

$6.99

iPod Video 60/80 GB Headphone Jack & Hold Switch 이미지
iPod Video 60/80 GB Headphone Jack & Hold Switch

$24.99

« 모든 스토리로 돌아가기

댓글 0개

댓글 쓰기