소개

This teardown is a working Actiontec Q1000 Modem, sold by Qwest as a Qwest Q1000.

해당 분해도는 수리 안내서가 아닙니다. Actiontec Q1000 DSL Modem 수리는 저희 서비스 설명서를 사용하십시오.

  1. The Qwest Q1000 modem, made by Actiontec.
    • The Qwest Q1000 modem, made by Actiontec.

    • Port side with antennas detached.

      • DSL and Phone in ports

      • 4 Ethernet ports

      • USB port, reset button, and power jack

    • Not a screw in sight.

    댓글 쓰기

  2. As usual, the rubber feet are hiding screws!
    • As usual, the rubber feet are hiding screws!

    댓글 쓰기

    • Nothing really to see here...

    • Remove the 2 antenna wires from the wifi card. One is also taped to the back of the board.

    • The circuit board is finally free!

    댓글 쓰기

    • Looks like someone was generous with the thermal paste.

    • Underneath the cover:

      • Broadcom BCM6366

      • Broadcom BCM53115

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • The Wi-Fi card lets down its shield...

    • The chip is a BCM4322.

    댓글 쓰기

    • The inside of the top case.

    • The antenna connectors are screwed onto the case.

    댓글 쓰기

    • The antenna connectors have gold-plated coax connectors and standard Wi-Fi antenna connectors.

    • What's underneath the heat-shrink? A ferrite bead to minimize interference.

    댓글 쓰기

    • Testing out the light pipe with an LED throwie...

    • The light pipe takes light from tiny surface-mount LEDS on the motherboard and refracts it to the panel.

    • Here are all the LEDS:

      • 8 of the LEDS that work with the light pipe

      • One more surface mount LED

      • A white LED for illuminating the Qwest logo

      • A dual-color (red/green) LED for the WPS status indicator.

    댓글 쓰기

    • The empty shell that once held a DSL modem.

    • The 2 detachable Wi-Fi antennas. Nothing to tear down here!

    댓글 쓰기

    • Repairability score: 8/10

    • The entire device is held together with only 4 screws.

    • The Wi-Fi antenna connectors are screwed in and the cables are not soldered to the board.

    • The antennas are replaceable as well.

    • The heat sink is soldered in place, making removal difficult.

    • The Wi-Fi card is soldered in and held in place with silicon adhesive, making it impossible to remove without damaging the card or the device.

    댓글 쓰기

첨부 문서

jrw01

회원 가입일: 2013년 08월 22일

1,125 평판

안내서 23개 작성하였습니다

Awesome teardown! These things have gotten so simple. Those antennas would be pretty easy to repurpose for something else.

Kyle Wiens - 답글

What are the part number, volts, and amps of the power supply?

PDXTek - 답글

댓글 쓰기

조회 통계:

지난 24시간: 4

지난 7일: 5

지난 30일: 17

전체 시간: 5,575