Skip to main content

추천 문서

해당 분해도는 수리 안내서가 아닙니다. Autosampler Node 수리는 저희 서비스 설명서를 사용하십시오.

  1. Generally, there will also be ultrasonic components, such as wires, present within the node. There is no ultrasonic connected to our node in order to focus entirely on the autosampler Generally, there will also be ultrasonic components, such as wires, present within the node. There is no ultrasonic connected to our node in order to focus entirely on the autosampler
    • Generally, there will also be ultrasonic components, such as wires, present within the node. There is no ultrasonic connected to our node in order to focus entirely on the autosampler

  2. Ensure you remove the battery first before doing anything else Ensure you remove the battery first before doing anything else Ensure you remove the battery first before doing anything else
    • Ensure you remove the battery first before doing anything else

  3. If you choose to disconnect the wires from the terminal, we recommend you either write down the wires' respective locations on the terminal, or consult our pin documentation when reassembling If you choose to disconnect the wires from the terminal, we recommend you either write down the wires' respective locations on the terminal, or consult our pin documentation when reassembling If you choose to disconnect the wires from the terminal, we recommend you either write down the wires' respective locations on the terminal, or consult our pin documentation when reassembling
    • If you choose to disconnect the wires from the terminal, we recommend you either write down the wires' respective locations on the terminal, or consult our pin documentation when reassembling

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. To disconnect the blue circled point on the solar charger, you have to remove the terminal at the blue circle on the board To disconnect the blue circled point on the solar charger, you have to remove the terminal at the blue circle on the board To disconnect the blue circled point on the solar charger, you have to remove the terminal at the blue circle on the board
    • To disconnect the blue circled point on the solar charger, you have to remove the terminal at the blue circle on the board

  6. Pull the module from the bottom; pulling the module in a different way may damage it Pull the module from the bottom; pulling the module in a different way may damage it Pull the module from the bottom; pulling the module in a different way may damage it
    • Pull the module from the bottom; pulling the module in a different way may damage it

  7. In the second image, one of the screws is already removed In the second image, one of the screws is already removed
    • In the second image, one of the screws is already removed

  8. With the interior of the small node removed, these are the components you should have (from left to right) The battery
    • With the interior of the small node removed, these are the components you should have (from left to right)

    • The battery

    • Solar charger with terminal still attached

    • Relay with terminal still attached

    • Module with antenna still attached

    • Board with 4 screws

첨부 문서

Nicholas Jeng

회원 가입일: 2018년 01월 16일

529 평판

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 107