기기를 수리하세요 커뮤니티 상점

Belkin Express Dock Teardown

작성자 thompsonfamily (또 다른 기여자 2명)
게시일: June 13, 2013
  • 댓글 2
  • 즐겨찾기 14
  • 조회수: 6.1k

Belkin Express Dock Teardown

작성자 thompsonfamily (또 다른 기여자 2명)
게시일: June 13, 2013
  • 댓글 2
  • 즐겨찾기 14
  • 조회수: 6.1k

분해도

소개

The only tools needed are a philips screwdriver and a narrow putty knife.

필요한 것

해당 분해도는 수리 안내서가 아닙니다. Belkin Express Dock 수리는 저희 서비스 설명서를 사용하십시오.

  1. Belkin Express Dock Teardown, Belkin Express Dock Teardown: 1 단계, 이미지 1/1

    • View of the connectors

    편집

  2. Belkin Express Dock Teardown: 2 단계, 이미지 1/2 Belkin Express Dock Teardown: 2 단계, 이미지 2/2

    • Use a putty knife to remove the four rubber feet. Once removed, there are 4 phillips screws to be removed.

    편집

  4. Belkin Express Dock Teardown: 3 단계, 이미지 1/1

    • The next step is to use the putty knife to pry off one of the two plastic endcaps, they snap out and the circuit board slides out.

    편집

  5. Belkin Express Dock Teardown: 4 단계, 이미지 1/1

    • Use the phillips screwdriver to remove 5 more screws to remove the plastic mounting frame.

    편집

  6. Belkin Express Dock Teardown: 5 단계, 이미지 1/2 Belkin Express Dock Teardown: 5 단계, 이미지 2/2

    • Front and back of the board.

    • From left to right on the front of the board the major chips are: LSI FW643E-02 (FIreWire800); Broadcom BCM57762 (gige); Intel L150I56 (Thunderbolt controller), NXP LPC1114F (two), Fresco FL1100 (USB3); C-Media CM119A (Audio)

    • From left to right on the back of the board the major chips are: Parade PS161HDM; Parade PS8301 (two); NXP ZSD310 (two); Parade PS8321. The chips seem to support HDMI/DVI conversion and Display Port!

    편집

  7. Belkin Express Dock Teardown: 6 단계, 이미지 1/3 Belkin Express Dock Teardown: 6 단계, 이미지 2/3 Belkin Express Dock Teardown: 6 단계, 이미지 3/3

    • close-ups of the major chips

    편집

작성자

다른 기여자 2명과 함께

thompsonfamily

회원 가입일: 01/21/11

217 평판

안내서 1개 작성함

배지: 0

댓글 2개

Hi… someone have the board scheme, please?

My express dock only flashing the Led when I plugged the power cord and turn off

Anderson Galdino - 답글

I cannot get any power going into the dock. I was wondering if anyone has had any experience with the analog board and dead power. The cables are hot so I know it must be the dock itself. Just nothing. Its internal leds do not light up and the Ethernet port has no activity lights either.

Any advice would be welcome.

airira - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 10

30일 전: 42

전체 시간: 6,195