주요 콘텐츠로 건너뛰기

필요한 것

해당 분해도는 수리 안내서가 아닙니다. Binbok EVO Pro Controller 수리는 저희 서비스 설명서를 사용하십시오.

  1. Binbok EVO Pro Controller Teardown, Remove six screws from the back.: 1 단계, 이미지 1/3 Binbok EVO Pro Controller Teardown, Remove six screws from the back.: 1 단계, 이미지 2/3 Binbok EVO Pro Controller Teardown, Remove six screws from the back.: 1 단계, 이미지 3/3
    • Use a Phillips #0 screwdriver.

  2. Binbok EVO Pro Controller Teardown, Lift the back cover off.: 2 단계, 이미지 1/1
    • The cover pulls off without much resistance.

  3. Binbok EVO Pro Controller Teardown, Unplug the battery and the rumble motors.: 3 단계, 이미지 1/1
    • Peel the battery up carefully. The adhesive is sticky and lifts easily off the PCB. I was a bit worried about being able to put the battery back, but the adhesive is sufficiently sticky to re-install it.

  4. Binbok EVO Pro Controller Teardown, Remove six screws from the PCB.: 4 단계, 이미지 1/1
    • Four screws are near the middle of the PCB while two screws are hidden away near the motors.

  5. Binbok EVO Pro Controller Teardown, Lift the PCB out.: 5 단계, 이미지 1/1
    • Insert wisdom here.

  6. Binbok EVO Pro Controller Teardown, Pull the silicone button covers out.: 6 단계, 이미지 1/2 Binbok EVO Pro Controller Teardown, Pull the silicone button covers out.: 6 단계, 이미지 2/2
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매
    • The covers each have little inserts that can be pulled through with tweezers or pliers when re-installing them.

  7. Binbok EVO Pro Controller Teardown, ALPS joysticks.: 7 단계, 이미지 1/1
    • Insert wisdom here.

  8. Binbok EVO Pro Controller Teardown, All the parts.: 8 단계, 이미지 1/1
    • Insert wisdom here.

  9. Binbok EVO Pro Controller Teardown, It works!: 9 단계, 이미지 1/1
    • I put the controller back together and it still works!

Tim McMahon

회원 가입일: 11/09/22

184 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 26

전체 시간: 294