주요 콘텐츠로 건너뛰기

필요한 것

해당 분해도는 수리 안내서가 아닙니다. Brother MFC-240C 수리는 저희 서비스 설명서를 사용하십시오.

  1. Brother MFC-240C Teardown, Brother MFC-240C Teardown: 1 단계, 이미지 1/3 Brother MFC-240C Teardown, Brother MFC-240C Teardown: 1 단계, 이미지 2/3 Brother MFC-240C Teardown, Brother MFC-240C Teardown: 1 단계, 이미지 3/3
    • Completely lift up scanner portion of printer and detach visible USB chord.

  2. Brother MFC-240C Teardown: 2 단계, 이미지 1/3 Brother MFC-240C Teardown: 2 단계, 이미지 2/3 Brother MFC-240C Teardown: 2 단계, 이미지 3/3
    • Use flat head screwdriver to pry tabbed panel off.

  3. Brother MFC-240C Teardown: 3 단계, 이미지 1/3 Brother MFC-240C Teardown: 3 단계, 이미지 2/3 Brother MFC-240C Teardown: 3 단계, 이미지 3/3
    • Gently lift up ribbon cable and pull it through holder then remove ribbon cable from its track.

  4. Brother MFC-240C Teardown: 4 단계, 이미지 1/3 Brother MFC-240C Teardown: 4 단계, 이미지 2/3 Brother MFC-240C Teardown: 4 단계, 이미지 3/3
    • Using a flat head screwdriver, remove the 2nd tabbed panel.

  5. Brother MFC-240C Teardown: 5 단계, 이미지 1/3 Brother MFC-240C Teardown: 5 단계, 이미지 2/3 Brother MFC-240C Teardown: 5 단계, 이미지 3/3
    • Remove the 4 plugs and unscrew ground-wire then place the plugs to the side.

  6. Brother MFC-240C Teardown: 6 단계, 이미지 1/2 Brother MFC-240C Teardown: 6 단계, 이미지 2/2
    • Using your screwdriver press down on the tab as shown. This allows the hinge to be removed from the printing body as seen in photo.

  7. Brother MFC-240C Teardown: 7 단계, 이미지 1/3 Brother MFC-240C Teardown: 7 단계, 이미지 2/3 Brother MFC-240C Teardown: 7 단계, 이미지 3/3
    • Extend scanner assembly completely to remove scanner portion.

  8. Brother MFC-240C Teardown: 8 단계, 이미지 1/2 Brother MFC-240C Teardown: 8 단계, 이미지 2/2
    • After removing the scanner assembly, place it on its head. Remove the hinge and 4 screws from the lower scanner portion using Philips-head screwdriver.

  9. Brother MFC-240C Teardown: 9 단계, 이미지 1/3 Brother MFC-240C Teardown: 9 단계, 이미지 2/3 Brother MFC-240C Teardown: 9 단계, 이미지 3/3
    • Place on opposite face, and gently pry upper and lower scanner portions apart. Remove the 4 plugs from the lower scanner portion.

  10. Brother MFC-240C Teardown: 10 단계, 이미지 1/3 Brother MFC-240C Teardown: 10 단계, 이미지 2/3 Brother MFC-240C Teardown: 10 단계, 이미지 3/3
    • To remove image sensor, detach the wire strip and pull it out. Remove the two springs that are under the image sensor after its removal.

  11. Brother MFC-240C Teardown: 11 단계, 이미지 1/3 Brother MFC-240C Teardown: 11 단계, 이미지 2/3 Brother MFC-240C Teardown: 11 단계, 이미지 3/3
    • To remove the belt, first place the image sensor to the side then press down on the gear base to loosen belt and remove from the gear.

  12. Brother MFC-240C Teardown: 12 단계, 이미지 1/3 Brother MFC-240C Teardown: 12 단계, 이미지 2/3 Brother MFC-240C Teardown: 12 단계, 이미지 3/3
    • Remove the 3 highlighted screws. For the gear driven by the motor, press the tab in highlighted gear to remove set gear. For the gear that was attached to belt, remove C-clip to remove gear then pull the last gear off.

  13. Brother MFC-240C Teardown: 13 단계, 이미지 1/2 Brother MFC-240C Teardown: 13 단계, 이미지 2/2
    • After the removing gears, lift up on the retained end of metal rod and pull out the other side.

  14. Brother MFC-240C Teardown: 14 단계, 이미지 1/2 Brother MFC-240C Teardown: 14 단계, 이미지 2/2
    • Once the rod has been removed, remove the metal plate in which the gears were sitting then take out the motor.

Andrew Adcock

회원 가입일: 11/10/16

131 평판

안내서 1개 작성함

댓글 2개

This is only the scanner part? where is the printer part for teardown?

rene moret - 답글

excellent guide, i like to know how to clean the head assembly and the the little hose that guides the ink to the head

alex jaimes - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 18

전체 시간: 4,863