주요 콘텐츠로 건너뛰기

필요한 것

해당 분해도는 수리 안내서가 아닙니다. Hoover LiNX 수리는 저희 서비스 설명서를 사용하십시오.

  1. Hoover LiNX Handle Teardown, Hoover LiNX Handle Teardown: 1 단계, 이미지 1/1
    • Remove the single 15mm Phillips #1 screw from the handle.

  2. Hoover LiNX Handle Teardown: 2 단계, 이미지 1/1
    • Remove the handle by pulling it up.

  3. Hoover LiNX Handle Teardown: 3 단계, 이미지 1/1
    • Remove two 15mm Phillips #1 screws from the handle.

  4. Hoover LiNX Handle Teardown: 4 단계, 이미지 1/2 Hoover LiNX Handle Teardown: 4 단계, 이미지 2/2
    • Use a plastic opening tool to carefully pry the black cover off of the handle.

  5. Hoover LiNX Handle Teardown: 5 단계, 이미지 1/2 Hoover LiNX Handle Teardown: 5 단계, 이미지 2/2
    • Remove five 15mm Phillips #1 black screws from the handle.

  6. Hoover LiNX Handle Teardown: 6 단계, 이미지 1/2 Hoover LiNX Handle Teardown: 6 단계, 이미지 2/2
    • Remove the silver plastic cover using the plastic opening tool.

Mark Nelson

회원 가입일: 01/25/18

452 평판

안내서 2개 작성하였습니다

USF Tampa, Team S7-G4, Passmore Spring 2018 USF Tampa, Team S7-G4, Passmore Spring 2018 회원

USFT-PASSMORE-S18S7G4

4 회원들

안내서 12개 작성하였습니다

댓글 2개

I have Hoover Linx cordless stick vacuum. Older but was very lightly used. Everything is clean moves freely, powers up, has suction, like new brush roller and belt. It all turns freely. But...turn the vacuum on...and the gear the brush belt goes around does not turn. Was hoping to find a more detailed disassembly. Anyone out there have to address that problem? Too bad as its a good little vacuum for small pickup stuff. I've alway used at large standard size for regular vacuuming thus it being lightly used.

Lori - 답글

OK, I found the instructions on the site here and disassembled it. The wires seem intact, nothing appeared pinched. Put it back together; I don't see that the company sells the replacement motor. I saw a few online but hate to spend 65 + Ship for a secondhand motor that may not even work.

Lori - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 17

전체 시간: 2,492