Skip to main content

동영상 개요

해당 분해도는 수리 안내서가 아닙니다. Huawei P8 Lite 수리는 저희 서비스 설명서를 사용하십시오.

  1. Remove the SIM & SD card trays first. Remove the SIM & SD card trays first.
    • Remove the SIM & SD card trays first.

  2. Remove the battery door—it's fastened tightly by clips. Free the clips with your fingernail or a pry tool. Be careful because the midframe is easily scratched, and the glass at the top of the battery door is easily broken.
    • Remove the battery door—it's fastened tightly by clips. Free the clips with your fingernail or a pry tool.

    • Be careful because the midframe is easily scratched, and the glass at the top of the battery door is easily broken.

  3. Remove the torx screws on the back. Remove the torx screws on the back.
    • Remove the torx screws on the back.

  4. Remove the loudspeaker by prying it up with a spudger. Remove the loudspeaker by prying it up with a spudger.
    • Remove the loudspeaker by prying it up with a spudger.

  5. Remove the securing brackets covering the motherboard. Remove the securing brackets covering the motherboard. Remove the securing brackets covering the motherboard.
    • Remove the securing brackets covering the motherboard.

  6. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  7. Carefully release all the connectors on the board, and remove the motherboard. Carefully release all the connectors on the board, and remove the motherboard. Carefully release all the connectors on the board, and remove the motherboard.
    • Carefully release all the connectors on the board, and remove the motherboard.

  8. Remove the rear camera and front camera. Remove the rear camera and front camera. Remove the rear camera and front camera.
    • Remove the rear camera and front camera.

  9. Remove the power flex.
    • Remove the power flex.

  10. Remove the battery. There is strong adhesive under the battery—work carefully to pry it free and be careful not to puncture the battery. Try an iOpener or hairdryer to heat the adhesive behind the battery. This softens the adhesive, making it easier to release the battery.
    • Remove the battery. There is strong adhesive under the battery—work carefully to pry it free and be careful not to puncture the battery.

    • Try an iOpener or hairdryer to heat the adhesive behind the battery. This softens the adhesive, making it easier to release the battery.

  11. Remove the motor vibrator. Remove the motor vibrator.
    • Remove the motor vibrator.

  12. Remove the sensor flex. It's covered under the digitizer flex and fastened by adhesive.
    • Remove the sensor flex. It's covered under the digitizer flex and fastened by adhesive.

  13. Remove the earpiece speaker.
    • Remove the earpiece speaker.

  14. Heat, cut the adhesive sticker and remove the screen carefully. Heat, cut the adhesive sticker and remove the screen carefully. Heat, cut the adhesive sticker and remove the screen carefully.
    • Heat, cut the adhesive sticker and remove the screen carefully.

  15. You're done!
    • You're done!

Sophia

회원 가입일: 2014년 03월 25일

41,682 평판

안내서 62개 작성하였습니다

Ciao ma la pistrina nera sulla batteria da dove posso comprarla? Perché mi è arrivato un terminale con il flat tagliato della pistrina e dovrei sostiturila.. Oppure può farne ammeno e cambio solo la batteria?

vito - 답글

thank you, its inspirating

buchta - 답글

Hello, I completed this repair and now the back-light is not working. Any suggestions? Know where I could locate a diagram of this board? TIA

beck74 - 답글

THis mobile audio ic for main speaker need information. because audio is full off on my phone but buzzer is health and good please help me but handset and small speaker are working

mohandes - 답글

Sir sent me p8 lite LCD light track

umarshazad001 - 답글

댓글 쓰기

조회 통계:

지난 24시간: 10

지난 7일: 123

지난 30일: 527

전체 시간: 99,045