Skip to main content

소개

Today we will be tearing down the JBL Clip 1 and looking at its components

해당 분해도는 수리 안내서가 아닙니다. JBL Clip 1 수리는 저희 서비스 설명서를 사용하십시오.

  1. Starting with the main side of the speaker, turn it over so that the back side is visible. Starting with the main side of the speaker, turn it over so that the back side is visible.
    • Starting with the main side of the speaker, turn it over so that the back side is visible.

  2. Pull off the rubber ring on the underside of the speaker so that the screws are visible. Unscrew the small phillips screws.
    • Pull off the rubber ring on the underside of the speaker so that the screws are visible.

    • Unscrew the small phillips screws.

  3. Firmly pull the back cover off of the device.
    • Firmly pull the back cover off of the device.

    • Begin to unscrew the screws holding the front of the speaker in place.

  4. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  5. After unscrewing the 3 screws on the inside turn the speaker over so that the front is placing you. Using a prying tool, pull up on the rim of the speaker front. Using a prying tool, pull up on the rim of the speaker front.
    • After unscrewing the 3 screws on the inside turn the speaker over so that the front is placing you.

    • Using a prying tool, pull up on the rim of the speaker front.

  6. Pull up to reveal the other side of the speaker chip and the speaker component itself. Be careful of the wire connecting the speaker to the board as too much pressure may cause it to snap.
    • Pull up to reveal the other side of the speaker chip and the speaker component itself.

    • Be careful of the wire connecting the speaker to the board as too much pressure may cause it to snap.

  7. Unscrew the speaker connecting to the front piece of plastic. Pull the speaker off of the front piece.
    • Unscrew the speaker connecting to the front piece of plastic.

    • Pull the speaker off of the front piece.

  8. Teardown is fully finished. There are only 5 main seperate components to the speaker! Teardown is fully finished. There are only 5 main seperate components to the speaker! Teardown is fully finished. There are only 5 main seperate components to the speaker!
    • Teardown is fully finished. There are only 5 main seperate components to the speaker!

Timothy McEvoy

회원 가입일: 2018년 01월 21일

572 평판

안내서 1개 작성함

Master Techs Master Techs 회원

Community

286 회원들

안내서 808개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 17

지난 7일: 62

지난 30일: 298

전체 시간: 570