분해도
This is a teardown of the Leap Motion Controller.
해당 분해도는 수리 안내서가 아닙니다. Leap Motion Controller 수리는 저희 서비스 설명서를 사용하십시오.
First, unplug the Leap Motion device.
Peel off the rubber backing and unscrew the housing from the internal components.
Peel back the tape on the internal components and lift the lenses out.
Handle the lens array in a clean environment
Put it back together!
Enjoy!
다른 기여자 2명과 함께
회원 가입일: 05/05/13
190 평판
안내서 1개 작성함
배지: 0
can you post high-res pictures of each circuit board's side?
Ben Iofel - 2013년 11월 21일 답글
해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.
24 시간 전: 0
7일 전: 0
30일 전: 5
전체 시간: 9,816