주요 콘텐츠로 건너뛰기

해당 분해도에 사용된 도구

소개

This is a teardown of a dual USB port bracket with LED activity lights for a desktop computer. These brackets, which mount on any open expansion card slot on a computer chassis, add two USB ports to the back of a computer using a connection to a 9-pin USB header on a motherboard. This one came out of a desktop with an MSI motherboard.

해당 분해도는 수리 안내서가 아닙니다. Dual USB Connector 수리는 저희 서비스 설명서를 사용하십시오.

  1. This part of the bracket consists of the circuit board enclosed in a plastic housing, which we will tear down in the next step.
    • This part of the bracket consists of the circuit board enclosed in a plastic housing, which we will tear down in the next step.

    • These connectors plug into the USB headers on the motherboard.

    • Use a Phillips #1 screwdriver to remove the four screws from the white casing and the two screws from the metal bracket.

    • On the bottom of the circuit board, the pins that hold its components can cut skin.

    • The two USB 2.0 ports.

    • The four LED lights, which light up depending on the activity of the USB ports.

  2. Raise the three connectors from the case and it's out!
    • Raise the three connectors from the case and it's out!

    • The connectors highlighted in red lead to the wires that connect the bracket to the motherboard.

    • The two USB ports.

    • The LED activity lights.

samhnri

회원 가입일: 2010년 04월 07일

415 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 9

전체 시간: 7,190