해당 분해도에 사용된 도구

소개

Will show the process of taking apart of computer mouse that uses a ball for the process of tracking motion.

해당 분해도는 수리 안내서가 아닙니다. Mouse 수리는 저희 서비스 설명서를 사용하십시오.

  1. Rotate mouse over and locate Trackball cover
    • Rotate mouse over and locate Trackball cover

    • Using index fingers and thumb, rotate counter-clockwise

    댓글 쓰기

  2. After the Trackball cover has been rotated, pry the lid off using fingernails.
    • After the Trackball cover has been rotated, pry the lid off using fingernails.

    • Remove Trackball cover and place to the side.

    • Angle mouse to eject Trackball from the casing.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Using a Phillips head screwdriver, locate screw hole and unscrew the screw inside.

    • Lift the two cases apart and place screw to the side.

    댓글 쓰기

    • Remove the wire from the plastic casing near the top of the mouse.

    • Lift up to remove the PCB which is attached to the mouse.

    • Place case to the side.

    댓글 쓰기

    • Locate where the wire is connected to the PCB via the white connection.

    • Pry the connections apart and place the cable to the side.

    댓글 쓰기

Kevin Gingrich

회원 가입일: 2011년 10월 06일

172 평판

안내서 2개 작성하였습니다

Cal Poly, Team 20-28, Maness Fall 2011 Cal Poly, Team 20-28, Maness Fall 2011 회원

CPSU-MANESS-F11S20G28

4 회원들

안내서 7개 작성하였습니다

Wow! Someone really worked hard on this guide. Kudos sir.

Tushar Varshney - 답글

Yes sir I won't know everything about the machine

mubarak wad gab tagel - 답글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 10

지난 30일: 27

전체 시간: 3,009