해당 분해도에 사용된 도구

해당 분해도는 수리 안내서가 아닙니다. Morphy Richards Iron 수리는 저희 서비스 설명서를 사용하십시오.

  1. This is the iron we will take apart.
    • This is the iron we will take apart.

    댓글 쓰기

  2. First remove the rear or the iron using the flathead screwdriver.
    • First remove the rear or the iron using the flathead screwdriver.

    댓글 쓰기

    • Next remove the cable bridge bracket.

    댓글 쓰기

    • Next remove the screws from the base. (see arrows for location)

    댓글 쓰기

    • Next remove the screw the hold the top on.

    댓글 쓰기

    • To free the long cable remove from terminal block at rear.

    댓글 쓰기

    • At the front of the iron pull out the buttons for the steam and water.

    댓글 쓰기

    • Next unclip the button holder (red circle) by undoing the screws (black circle)

    댓글 쓰기

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Next remove the bridge clip from the arrows position.

    댓글 쓰기

    • Next remove the inner button (black circle)

    • Now remove the centre screw (red arrow)

    댓글 쓰기

    • slide off the cable holder from the cable.

    댓글 쓰기

    • Disassemble the plug

    • First remove the casing.

    • Now remove the wires from the pins.

    • Next remove the pins.

    댓글 쓰기

    • Remove front of the iron by undoing the screw (arrow) by first taking off cover cap.

    댓글 쓰기

    • Next take out round selector, this is simply clipped so can be pulled out with pliers.

    댓글 쓰기

    • Next remove the washer parts at the front of the iron.

    • Take the tubing off.

    من فضلكم كيفة افك الجزءالامامي من الحديد

    douahiahmed - 답글

    • Remove the seals for the water pump.

    • Now take pumps out.

    댓글 쓰기

    • Remove the screw (circled) this will lead to the separation of the base and the top.

    댓글 쓰기

    • Remove the top of the iron to reveal the under parts.

    • Now remove the rubber seals from the plate.

    • Take out the screws linking to the stainless steel base.

    댓글 쓰기

    • Remove the terminal block from the wires.

    • Next take off the black section of the iron.

    댓글 쓰기

    • Now remove the screws from the steel base.

    댓글 쓰기

    • Next remove each individual part ( mostly wiring)

    i need THERMASTER wher shell i get

    KRISHNA NANA MOHITE - 답글

    • All parts at the end of the process.

    댓글 쓰기

RIchard fox

회원 가입일: 2010년 03월 17일

260 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

지난 24시간: 8

지난 7일: 45

지난 30일: 217

전체 시간: 20,151