주요 콘텐츠로 건너뛰기

해당 분해도는 수리 안내서가 아닙니다. Nintendo 64 Controller 수리는 저희 서비스 설명서를 사용하십시오.

  1. Behold the glorious retro controller face, then forget about it because you will flip the controller for the rest of the teardown. Use the size #1 Philips to remove the 7 screws on the back of the controller. Use the size #0 Philips to remove the smaller screws in the controller pak slot.
    • Behold the glorious retro controller face, then forget about it because you will flip the controller for the rest of the teardown.

    • Use the size #1 Philips to remove the 7 screws on the back of the controller.

    • Use the size #0 Philips to remove the smaller screws in the controller pak slot.

  2. Remove the back plate. You can now see the:
    • Remove the back plate. You can now see the:

    • Power Input

    • Game Pak Slot

    • Trigger Button Assemblies

    • Z Button Assembly

    • Joystick Module

  3. Using a spudger or similar tool, carefully pry the Z button assembly from the joystick module.
    • Using a spudger or similar tool, carefully pry the Z button assembly from the joystick module.

    • Remove the 3 size #0 screws holding in the joystick module.

    • Remove the joystick cable from the main board.

  4. Remove the joystick module. This particular module is a third party replacement. Yours may look different.
    • Remove the joystick module.

    • This particular module is a third party replacement. Yours may look different.

  5. Remove the main board and trigger assemblies. Your controller is now fully disassembled!
    • Remove the main board and trigger assemblies.

    • Your controller is now fully disassembled!

  6. Full IC Identification:
    • Full IC Identification:

    • You may need to enlarge it to view the text.

Ian

회원 가입일: 2018년 12월 07일

1,309 평판

안내서 2개 작성하였습니다

Kid fixers Kid fixers 회원

Community

117 회원들

안내서 79개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 8

7일 전: 55

30일 전: 216

전체 시간: 5,512