Nokia 3210 Teardown

Remove Battery cover, battery and SIM Card.

Remove the antenna with your fingers.

Remove these screws. These are Torx T6. You'll need this screwdriver to remove them.

If you remove the plate, you can see the Motherboard. Remove the Motherboard with a small flathead screwdriver or a spudger. (A spudger is recommended).

Here's the PCB with removed EMI shields.

CCONT NMP70467 Power Management IC

NMP0581 Power Supply IC

BGY252 and BGY 262 UHF Amplifier

Other side of the PCB.

Hitachi HWYN202A 900MHz Duplexer

Intel F160B3TA Flash

Atmel 24C128 EPROM

Samsung KM68U1000 SRAM

Buzzer MZT-03C

Texas Instruments MAD2PRI Microcontroller (ARM Based)

Disassembly Completed!