Skip to main content

소개

In this tutorial, I will show you how to disassemble the Nokia 3210.

해당 분해도는 수리 안내서가 아닙니다. Nokia 3210 수리는 저희 서비스 설명서를 사용하십시오.

  1. Remove Battery cover, battery and SIM Card.
    • Remove Battery cover, battery and SIM Card.

  2. Remove the antenna with your fingers.
    • Remove the antenna with your fingers.

  3. Remove these screws. These are Torx T6. You'll need this screwdriver to remove them.
    • Remove these screws. These are Torx T6. You'll need this screwdriver to remove them.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. If you remove the plate, you can see the Motherboard. Remove the Motherboard with a small flathead screwdriver or a spudger. (A spudger is recommended).
    • If you remove the plate, you can see the Motherboard. Remove the Motherboard with a small flathead screwdriver or a spudger. (A spudger is recommended).

  6. Here's the PCB with removed EMI shields.
    • Here's the PCB with removed EMI shields.

    • CCONT NMP70467 Power Management IC

    • NMP0581 Power Supply IC

    • BGY252 and BGY 262 UHF Amplifier

  7. Other side of the PCB.
    • Other side of the PCB.

    • Hitachi HWYN202A 900MHz Duplexer

    • Intel F160B3TA Flash

    • Atmel 24C128 EPROM

    • Samsung KM68U1000 SRAM

    • Buzzer MZT-03C

    • Texas Instruments MAD2PRI Microcontroller (ARM Based)

  8. Disassembly Completed!
    • Disassembly Completed!

Bryan

회원 가입일: 2012년 10월 27일

690 평판

안내서 5개 작성하였습니다

yaaaaas queeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeen

Gaubrisco - 답글

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 5

지난 30일: 26

전체 시간: 4,712