Philips Bluetooth adapter AEA2700 Teardown

here you can see the view from the top, the bottom and the backface - device is really tiny: only 7,5cm in diameter!

Remove 2 of the rubbers on the bottom side - you'll find 2 screws afterwards>> unscrew them ;)

now simply remove the top cover.

there's only one external component connected by cable: the NFC tag

it's easily possible to remove the circuit

lift it on the front side of the device

and pull it this direction - it helps to push at the cinch connector!

Front- and backview of the circuit

when reassembling take care to stick the NFC tag to the correct location in the cover