소개

PlayStation 3 super slim - how to fully disassemble.

You can see also: PlayStation 3 Super Slim Teardown


Please SUBSCRIBE to my channel ツ

동영상 개요

  1. Remove the three rubber feet, warranty sticker and four screws. Gently pull up on the bottom cover to remove it. Gently pull up on the bottom cover to remove it.
    • Remove the three rubber feet, warranty sticker and four screws.

    • Gently pull up on the bottom cover to remove it.

  2. Slide the HDD cover toward the rear of the device to remove it. Remove the blue screw shown to remove the HDD caddy. Remove the blue screw shown to remove the HDD caddy.
    • Slide the HDD cover toward the rear of the device to remove it.

    • Remove the blue screw shown to remove the HDD caddy.

  3. Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it. Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it. Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it.
    • Use a metal spudger to push the tab on the rear top finisher, and lift up to remove it.

  4. Repeat step 3 for the front top finisher. Repeat step 3 for the front top finisher. Repeat step 3 for the front top finisher.
    • Repeat step 3 for the front top finisher.

  5. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Remove the two screws indicated in the disk reader. Remove the five screws shown around the edge of the top cover. Lift the top cover up to remove it.
    • Remove the two screws indicated in the disk reader.

    • Remove the five screws shown around the edge of the top cover.

    • Lift the top cover up to remove it.

  7. Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in. Remove the two screws indicated and carefully disconnect the cable on the right side of the power supply. Lift the power supply up to remove it.
    • Move the optical disk reader assembly to the left to expose one of the screws holding the power supply in.

    • Remove the two screws indicated and carefully disconnect the cable on the right side of the power supply.

    • Lift the power supply up to remove it.

  8. Carefully disconnect the ribbon cables indicated. Lift the optical disk reader up to remove it. Disconnect and remove the white cable and ribbon cable indicated.
    • Carefully disconnect the ribbon cables indicated.

    • Lift the optical disk reader up to remove it.

    • Disconnect and remove the white cable and ribbon cable indicated.

  9. Remove the seven screws indicated. Lift the motherboard assembly up out of the lower half of the case to remove it. Carefully disconnect the Wi-Fi antenna cables and fan connector indicated by  red arrows.
    • Remove the seven screws indicated.

    • Lift the motherboard assembly up out of the lower half of the case to remove it.

    • Carefully disconnect the Wi-Fi antenna cables and fan connector indicated by red arrows.

  10. Remove the six screws indicated to separate the heatsink and shield from the motherboard. Remove the six screws indicated to separate the heatsink and shield from the motherboard. Remove the six screws indicated to separate the heatsink and shield from the motherboard.
    • Remove the six screws indicated to separate the heatsink and shield from the motherboard.

  11. Did you do it successfully?
결론

To reassemble your device, follow these instructions in reverse order.

다른 20명이 해당 안내서를 완성하였습니다.

ZFix

회원 가입일: 2013년 12월 09일

162,554 평판

안내서 304개 작성하였습니다

Master Techs Master Techs 회원

Community

280 회원들

안내서 784개 작성하였습니다

What's the name of the screwdriver that undo's the star shaped screws?

themasterassassin8787 - 답글

It is a T8 Torx screwdriver! I'll add the tools to this guide =)

Sam Lionheart -

i took apart my ps3 super slim and put it back together but there is no power what so ever no red light at all

pastorjon.m - 답글

Same here did you fix it?

Kriss -

One thing to pay attention to: The T8 Torx screws (at least on my 500GB model) are Tamper Proof TR8 screws, meaning you need a special screwdriver to undo them. A normal T8 wont work.

Wesley V - 답글

조회 통계:

지난 24시간: 22

지난 7일: 151

지난 30일: 715

전체 시간: 31,849