주요 콘텐츠로 건너뛰기

필요한 것

해당 분해도는 수리 안내서가 아닙니다. Ryobi heat gun EHG2000 수리는 저희 서비스 설명서를 사용하십시오.

  1. Ryobi heat gun Teardown, Removing cowling: 1 단계, 이미지 1/2 Ryobi heat gun Teardown, Removing cowling: 1 단계, 이미지 2/2
    • Remove black plastic nose cowling by twisting anti-clockwise

  2. Ryobi heat gun Teardown, Remove screws and clip: 2 단계, 이미지 1/2 Ryobi heat gun Teardown, Remove screws and clip: 2 단계, 이미지 2/2
    • Remove Philips head screws - 7 places

    • Remove wire clip

  3. Ryobi heat gun Teardown, Split adhesive label: 3 단계, 이미지 1/1
    • With a sharp blade cut the adhesive label inline with the split line of where the outer housings meet.

  4. Ryobi heat gun Teardown, Opening up: 4 단계, 이미지 1/1
    • Remove top half housings leaving subassemblies and parts on lower housing

  5. Ryobi heat gun Teardown, Identifying parts: 5 단계, 이미지 1/1
    • Internal parts

    • Motor

    • Heater element - stainless steel

    • PCB (Printed circuit board)

    • LED and Lens - Acrylic injection moulding

    • Switch assembly - ABS injection moulding

    • Housing - PC-ABC Injection moulding

Miles Park

회원 가입일: 03/31/17

121 평판

안내서 1개 작성함

댓글 한 개

Why the elements was not hot

Resilau Lino - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 6

전체 시간: 1,565