주요 콘텐츠로 건너뛰기

해당 분해도에 사용된 도구

소개

This is a Sega Genesis model 2. In this tear down you will be able to see what the inside of the Sega Genesis should look like.

해당 분해도는 수리 안내서가 아닙니다. Sega Genesis II 수리는 저희 서비스 설명서를 사용하십시오.

  1. Flip the system over
    • Flip the system over

  2. Remove the four outer screws (you may want a small cup to keep your screws in.) Remove the four outer screws (you may want a small cup to keep your screws in.)
    • Remove the four outer screws (you may want a small cup to keep your screws in.)

  3. Take plastic top off.
    • Take plastic top off.

  4. Remove the nine inner screws.
    • Remove the nine inner screws.

  5. Remove metal piece.
    • Remove metal piece.

  6. You now have access to your circuit board. (If you wish to remove the circuit board, continue.)
    • You now have access to your circuit board. (If you wish to remove the circuit board, continue.)

  7. Remove the two screws highlighted in picture to remove the circuit board.
    • Remove the two screws highlighted in picture to remove the circuit board.

  8. Lift the black piece of plactic up.
    • Lift the black piece of plactic up.

  9. Lift up the metal piece.
    • Lift up the metal piece.

  10. You now have access to the inside of the bottom plastic piece.
    • You now have access to the inside of the bottom plastic piece.

  11. This is the circuit board. This is the circuit board. This is the circuit board.
    • This is the circuit board.

  12. Do the steps backwards to reassemble.
    • Do the steps backwards to reassemble.

Thor Odinson

회원 가입일: 2015년 06월 04일

152 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 9

30일 전: 73

전체 시간: 6,567