해당 분해도에 사용된 도구

소개

Alright. This guide is a teardown to show the safest and easiest way to take apart your genesis.

해당 분해도는 수리 안내서가 아닙니다. Sega Genesis II 수리는 저희 서비스 설명서를 사용하십시오.

  1. Let's start by taking the small door found on the bottom right side of your console
    • Let's start by taking the small door found on the bottom right side of your console

    댓글 쓰기

  2. Next, remove the four, black 11mm screws from the bottom of your console.
    • Next, remove the four, black 11mm screws from the bottom of your console.

    댓글 쓰기

    • Carefully lift the top off of the console.

    • It should come off relatively easy

    • If it doesn't, ensure that all four screws are removed

    댓글 쓰기

    • Remove the six, gold, 8mm screws and the three, black, 8mm screws holding down the EM shield

    • After removing the screws, the shield will come off very easily.

    댓글 쓰기

    • Remove the two 17mm black screws on the left and right side of the PIN to release the circuit board from the bottom EM shield.

    • After the screws are releases, the circuit board can easily be removed from the console.

    댓글 쓰기

    • Well, there you have it!

    • One disassembled Sega Genesis. I hope this guide was helpful and informative. Good luck and Happy Gaming!

    • This guide brought to you by: Frankie's Video Game Console Repair and iFixit.

    댓글 쓰기

Frankie

회원 가입일: 2011년 09월 02일

367 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 10

지난 30일: 29

전체 시간: 11,765