메인 콘텐츠로 스킵하기

동영상 개요

해당 분해도는 수리 안내서가 아닙니다. Sony Xperia Z4 수리는 저희 서비스 설명서를 사용하십시오.

  1. Remove back cover. Remove back cover.
    • Remove back cover.

    How much heat needed to melting down the back cover adhesive…

    Aspar Riansyah - 답글

    it is no need to heat too much.

    KK0902 -

  2. Remove battery. Remove battery. Remove battery.
    • Remove battery.

  3. Release all the connectors on board and remove the screws there. Release all the connectors on board and remove the screws there.
    • Release all the connectors on board and remove the screws there.

  4. Remove that small securing bracket. Remove that small securing bracket.
    • Remove that small securing bracket.

  5. Remove rear camera and front camera. Remove rear camera and front camera. Remove rear camera and front camera.
    • Remove rear camera and front camera.

  6. Remove motherboard. Remove motherboard.
    • Remove motherboard.

  7. Remove sensor flex. Remove sensor flex. Remove sensor flex.
    • Remove sensor flex.

  8. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  9. Remove two pieces of cover brackets on the audio jack. Remove two pieces of cover brackets on the audio jack. Remove two pieces of cover brackets on the audio jack.
    • Remove two pieces of cover brackets on the audio jack.

  10. Cut the adhesive on the top of the audio jack and remove the audio jack assembly. Cut the adhesive on the top of the audio jack and remove the audio jack assembly.
    • Cut the adhesive on the top of the audio jack and remove the audio jack assembly.

  11. Remove signal cable.
    • Remove signal cable.

  12. Release connectors connecting on the antenna logic board and finally remove it. Release connectors connecting on the antenna logic board and finally remove it. Release connectors connecting on the antenna logic board and finally remove it.
    • Release connectors connecting on the antenna logic board and finally remove it.

  13. Release LCD connector there and loosen the bottom of the whole flex. Release LCD connector there and loosen the bottom of the whole flex.
    • Release LCD connector there and loosen the bottom of the whole flex.

  14. Remove main flex. Remove main flex. Remove main flex.
    • Remove main flex.

  15. Remove loudspeaker securing bracket. Remove loudspeaker securing bracket.
    • Remove loudspeaker securing bracket.

  16. Remove loudspeaker hidden under the flex. Remove loudspeaker hidden under the flex.
    • Remove loudspeaker hidden under the flex.

  17. Push the USB port out of the slot. Push the USB port out of the slot.
    • Push the USB port out of the slot.

  18. Remove USB charging flex assembly. Remove USB charging flex assembly.
    • Remove USB charging flex assembly.

  19. Remove earpiece speaker. Remove earpiece speaker.
    • Remove earpiece speaker.

  20. Remove the metal bracket covering on the screen flex. Remove the metal bracket covering on the screen flex.
    • Remove the metal bracket covering on the screen flex.

  21. Remove LCD screen carefully. Remove LCD screen carefully. Remove LCD screen carefully.
    • Remove LCD screen carefully.

    Gerade so ein schwieriger Schritt, wie das Entfernen des Displays, bei dem auch echt viel schief gehen kann, sollte ruhig etwas detaillierter beschrieben werden. Die Mühe ist man der Community echt schuldig.

    Davon mal abgesehen ist das Bildmaterial echt gut gelungen!

    Gerdi - 답글

  22. Done.
    • Done.

Sophia

회원 가입일: 2014년 03월 25일

41,770 평판

안내서 62개 작성하였습니다

Is it possible to replace the nylon corners? I've heard it was possible in the previous xperia z devices like z2 and z3. Unfortunately I couldn't find the replacement corners for z3+ or z4 anywhere. Anyone has any idea about it?

Sanket - 답글

Late answer, but it seems like there’s replacement parts for the corners now. I don’t know how to replace them, though.

Farie Indriawan -

댓글 쓰기

조회 통계:

지난 24시간: 23

지난 7일: 111

지난 30일: 502

전체 시간: 25,494