기기를 수리하세요

수리할 권리

상점

Sprint Airave SCS-26UC2 Teardown

작성자 Erik Leonard (또 다른 기여자 2명)
게시일: June 11, 2011
  • 댓글 0
  • 즐겨찾기 4
  • 조회수: 3.1000

분해도

해당 분해도에 사용된 도구

해당 도구 구매

소개

This guide will walk you through the steps to completely disassemble a Sprint Airave.

해당 분해도는 수리 안내서가 아닙니다. Sprint Airave SCS-26UC2 수리는 저희 서비스 설명서를 사용하십시오.

  1. Remove the external antenna, GPS cover, and GPS module. Remove the external antenna, GPS cover, and GPS module. Remove the external antenna, GPS cover, and GPS module.

    • Remove the external antenna, GPS cover, and GPS module.

    편집

  2. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off. Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.

    • Use a pry tool to remove the white outer cover. Pry towards the front of the device. Continue prying down the length of the cover until it pops off.

    편집

  3. Locate and remove the four Phillips screws

    • Locate and remove the four Phillips screws

    편집

  5. With the cover removed you now have access to the circuit board.

    • With the cover removed you now have access to the circuit board.

    편집

  6. Using an 8mm socket you can remove the antenna pigtail.

    • Using an 8mm socket you can remove the antenna pigtail.

    편집

  7. Release the clip indicate to remove the circuit board.

    • Release the clip indicate to remove the circuit board.

    편집

  8. Here is the circuit board fully removed. Here is the circuit board fully removed.

    • Here is the circuit board fully removed.

    편집

작성자

다른 기여자 2명과 함께

Erik Leonard

회원 가입일: 2011년 06월 11일

164 평판

안내서 1개 작성함

배지: 3

댓글 0개

의견 추가하세요

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 3,171