해당 분해도에 사용된 도구

소개

Teardown of the TI BA II Plus calculator.

해당 분해도는 수리 안내서가 아닙니다. Texas Instruments TI BA II Plus 수리는 저희 서비스 설명서를 사용하십시오.

  1. The BA II Plus Professional calculator.
    • The BA II Plus Professional calculator.

    댓글 쓰기

  2. Firstly on the back cover, remove the small sticky soft cushioning material covering the recess with the screws in it. 4 of them in total. Unscrew them.
    • Firstly on the back cover, remove the small sticky soft cushioning material covering the recess with the screws in it. 4 of them in total. Unscrew them.

    댓글 쓰기

    • Remove the battery cover by sliding it out.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Use a flathead screwdriver to gently part the bottom and top cover at the hinge on the top.

    댓글 쓰기

    • Removing the back cover to reveal the foil, unscrew the 4 screws holding the foil and 4 other holding the printed circuit board to the front cover.

    댓글 쓰기

    • Remove the foil. Ensure all screws are off.

    댓글 쓰기

    • This must separate the front cover from the board. Remove the board and turn it over to view the front side with a soft black cushion cover over a smooth shinny mesh.

    댓글 쓰기

    • The keys should fall out of the front cover when you turn it over as well. Thats it!!!

    댓글 쓰기

VSP

회원 가입일: 2013년 06월 23일

101 평판

안내서 1개 작성함

Well, my TI BA II plus has a broken LCD screen which according to the customer care is not covered under the warranty. Is it possible to find a replacement LCD to replace the broken one in the calculator.

Thanks

VSP - 답글

My calculated get in water, now its not working is there any way to repair it.

ankur - 답글

This is a terrific service that you are providing. It makes fixing thing so much easier. Thank you.

ROB LYTLE - 답글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 5

지난 30일: 59

전체 시간: 6,050