기기를 수리하세요 커뮤니티 상점

Xbox One Wireless Controller Teardown

작성자 ubaldo gutierrez (또 다른 기여자 10명)
게시일: November 9, 2016
  • 댓글 20
  • 즐겨찾기 30
  • 조회수: 168.3k

Xbox One Wireless Controller Teardown

작성자 ubaldo gutierrez (또 다른 기여자 10명)
게시일: November 9, 2016
  • 댓글 20
  • 즐겨찾기 30
  • 조회수: 168.3k

분해도

필요한 것

해당 분해도는 수리 안내서가 아닙니다. Xbox One Wireless Controller Model 1537 수리는 저희 서비스 설명서를 사용하십시오.

  1. Xbox One Wireless Controller Teardown, Get an Xbox One Controller: 1 단계, 이미지 1/1

    • Start off with having an Xbox One Controller (:

    편집

  2. Xbox One Wireless Controller Teardown, Remove First Screw: 2 단계, 이미지 1/2 Xbox One Wireless Controller Teardown, Remove First Screw: 2 단계, 이미지 2/2

    • Start with removing the battery pack and exposing the T8 security screw. The screw should be hidden behind a warranty sticker.

    편집

  3. Xbox One Wireless Controller Teardown, Remove side panels: 3 단계, 이미지 1/3 Xbox One Wireless Controller Teardown, Remove side panels: 3 단계, 이미지 2/3 Xbox One Wireless Controller Teardown, Remove side panels: 3 단계, 이미지 3/3

    • Remove the side panels exposing the second T8 security screw using a spudger, an IFixit Opening Tool, or your nails, each choice is fun.

    편집

  4. Xbox One Wireless Controller Teardown, Remove all screws: 4 단계, 이미지 1/1

    • By removing all side panels all 5 T8 security screws have appeared!

    편집

  6. Xbox One Wireless Controller Teardown, Remove Faceplate: 5 단계, 이미지 1/3 Xbox One Wireless Controller Teardown, Remove Faceplate: 5 단계, 이미지 2/3 Xbox One Wireless Controller Teardown, Remove Faceplate: 5 단계, 이미지 3/3

    • Once you removed the T8 security screws remove the front face plate.

    편집

  7. Xbox One Wireless Controller Teardown, Tape down rumble motors: 6 단계, 이미지 1/2 Xbox One Wireless Controller Teardown, Tape down rumble motors: 6 단계, 이미지 2/2

    • Tape down the rumbler motors to prevent them from falling out.

    편집

  8. Xbox One Wireless Controller Teardown, Remove T6 screws: 7 단계, 이미지 1/3 Xbox One Wireless Controller Teardown, Remove T6 screws: 7 단계, 이미지 2/3 Xbox One Wireless Controller Teardown, Remove T6 screws: 7 단계, 이미지 3/3

    • Remove the T6 screws to remove the PCB's.

    • It takes a pull to seperate the connectors.

    • Watch the wires! You can not fully remove the circuit board without removing the wires and it requires soldering.

    편집

  9. Xbox One Wireless Controller Teardown: 8 단계, 이미지 1/3 Xbox One Wireless Controller Teardown: 8 단계, 이미지 2/3 Xbox One Wireless Controller Teardown: 8 단계, 이미지 3/3

    • Remove the top cover, it folds over.

    • There are 6 T6 screws to remove.

    편집

  10. Xbox One Wireless Controller Teardown: 9 단계, 이미지 1/3 Xbox One Wireless Controller Teardown: 9 단계, 이미지 2/3 Xbox One Wireless Controller Teardown: 9 단계, 이미지 3/3

    • Remove the circuit board

    • Under the rubber is the A B X Y buttons.

    편집

  11. Xbox One Wireless Controller Teardown: 10 단계, 이미지 1/3 Xbox One Wireless Controller Teardown: 10 단계, 이미지 2/3 Xbox One Wireless Controller Teardown: 10 단계, 이미지 3/3

    • Follow the instructions in reverse to get everything together again. :D

    편집

작성자

다른 기여자 10명과 함께

ubaldo gutierrez

회원 가입일: 11/07/16

262 평판

안내서 1개 작성함

배지: 0

댓글 15개

Very good instructions...

Chadwick Posey - 답글

Nice instructions. I need to take apart mine and replace the d-pad. The previous owner was a bit... rough. Sometimes it doesn't work or it clicks twice. Cheers!

Johnathan - 답글

Do you think that you can label the internals of the controller.

David Becerra - 답글

I have a custom controller from the xbox design labs. I want to change the led on the front.

Can someone point out the model/ size led I would need?

Alajandro - 답글

How do you put the sync buttom back in? Which way does it face?

Throaty Sea5 - 답글

댓글 쓰기

조회 통계:

24 시간 전: 42

7일 전: 278

30일 전: 1,441

전체 시간: 168,314