주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Onto the logic board, which may be the most important of all the internal goodies. It regulates all the aspects of operation and safety for the device.

The logic board simply sits on brackets molded into the plastic housing. No screws!

Disconnect a couple of spade connectors from it, and slide it out a bit to reach the control panel ribbon cable connector.

Disconnect the control panel ribbon cable from the board. This should almost free the logic board from the rest of the blender.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.