주요 콘텐츠로 건너뛰기
도움말

단계 유형:

끌어서 재배열 합니다

Dangerous DC Voltage > 200V, stored in a 330V 80uF capacitor set.

Flash xenon tube terminals, positive connected to capacitor, negative controlled by circuit, and a trigger signal.

Use 10kohm, >2W resistor, connect 2 solder joints for more than 5sec. These are flash condenser/capacitor terminals. DO NOT discharge by SHORT them. (Note 2020-10-13)

DMM's Low-Z voltage works even better, also safer.

Measure voltage between 2 solder joints to ensure voltage <10V

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.