주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

CAUTION: Do not yank the casing apart!!!

Gently pry from the bottom and work a finger along the side and until monitor pops in half.

The speaker cabling is soldered to the main board and the speaker is stuck in the front casing with adhesive.

Lay the two halves as shown.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.