주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

PROCEED WITH CAUTION!!! The antenna cable and the battery contacts are soldered onto the board.

Your monitor should look like this, with a small gap between the main board and the rear casing.

The next step will merely free the volume control dial from the casing and NOT free the main board from the casing.

To remove the main board from the casing, you MUST desolder the antenna cable and two battery contacts from the board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.