주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With the Camera Face Plate removed, use the Spudger Tool to pry the Camera Assembly away from the Camera Body

Once the Camera Assembly comes loose from the Camera Body, use the Spudger Tool to pry against the two plastic tabs on the bottom of the Camera Assembly that hold the Camera Assembly to the Camera Body PCB (Main PCB)

Pull the Camera Assembly away from the Assembly Body

The Camera Assembly is held in place by Zero Insertion Force Connectors to the Main PCB in the Camera Body

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.